FloJet Compact Automatic Water System Pump 12v LF122202

FloJet Compact Automatic Water System Pump 12v LF122202

Features:

• Compact Design Measuring 6.4" (162 mm) in Length
• Fully Automatic Demand Pump
• Self-priming and Can Operate Dry Without Damage
• Built-in Thermal Protector
• Sealed Pressure Switch and Motor
• Flow Rates to 1.0 GPM (3.8 L/min.) and Operating Pressures to 25 PSI (1.7 bar)
• Compact automatic demand pump.
• Sealed pressure switch automaticatly starts and stops pump when discharge valve is opened and closed.
• Self-prlming so pump can be located above supply tank.
• Can run dry for extended periods of time without damage.
• Built-in thermal protector
• Low amp draw for battery powered applications.
• Soft compliant Santoprene mounting system.

Specifications: LF122202

Pump Design                           Reciprocating Diaphragm
Flow Rate                                 1.0 gpm 3.8 lpm
Duty Cycle                                Intermittent
Port Type                                  3/8" (9.5 mm) Hose Barb
Operating Pressure                 1.7 bar 25 psi
Pressure Switch Setting         12.4 - Off 1.7 - On bar 35 - Off 25 - On psi
Self Priming                              Up to 2.5 ft (1.76 m) Vertically
Max. Liquid Temperature        43 °C 110 °F
Motor                                         Permanent Magnet Motor
Motor Voltage                          12 Vdc
Current                                      2.5 Amp Nominal @ 25 PSI (1.7 bar)
Diaphragm                               Santoprene
Check Valve                            EPDM
Pressure Switch Setting         35 psi  2.4 bar
Manual On/Off Switch             No
Motor Housing                         Plastic
Protection                                Thermal