Jabsco model # 12560-0001 - Motor Pump Unit

FEATURES
 Impeller: Neoprene
 Shaft: Lip Seal
 Port Size: Lip Seal
 Motor / Amp Draw: , 12VDC Volts,
 APPLICATIONS
 
 • SELF-PRIMING: With a wet impeller, pump will produce a suction lift of about 4 feet (1.2m) and lift of 20 feet (6m) when primed. If the pump is dry, it will prime about 1.5 feet (0.47m).Be sure suction lines are airtight or pump will not self-prime.
 • RUNNING DRY: Unit depends on liquid pumped for lubrication. Do not run dry for more than 30 seconds. Lack of liquid will damage the impeller.
 • PRESSURES: For operation, pressure should not exceed 9 psi (20 feet).
 • TEMPERATURES: impeller recommended for liquid temperatures of 50° to 160°F (10° to 70°C).
 
 USES :
 Use for bilge pumping, live well circulation, washdown and general pumping requirements. If bilge water contains significant amounts of oil, the standard impeller must be replaced with a nitrile impeller #6303-0003 to avoid impeller swell.
 
 Jabsco Pump 12560-0001
 Jabsco model # 12560-0001 - Motor Pump Unit